Water cooling JPT 3W UV laser printing machine for PE PET packaging
Ultraviolet lasers have benefits that other lasers do not have that is Ability to limit thermal stress.This is because most UV laser systems are running at low power.
By using techniques sometimes called "cold ablation",the beam of the UV laser produces a reduced heat affected zone and minimize the effects of edge processing, carbonation, and other thermal stresses.These negative effects are usually present with higher power lasers.
>>Laser source Advantages
-Photoelectric Integration,Anti-interference,One-button start
-Fully sealed structure, dust-proof, moisture-proof
-Self-purification-longer lifetime
-Compact size,saving installation space
-Narrower pulse duration
>>Application
- Marking for 3C industry
- Laser rapid prototyping
- Industrial micro machining
- Silicon wafer processing
- LED scribing
>>Technical parameter
Parameter Unit | Parameter | |||
Model | RF-UV-3W | RF-UV-5W | RF-UV-10W | |
Wavelength | 355ns | |||
Average power | >3w@40KHZ | >5W@60KHZ | >10w@80KHZ | |
Pulse duration | <10ns@40KHZ | <10ns@60KHZ | <12ns@80KHZ | |
Pulse Repetition Rate Range | 30-200KH | 40-300KHZ | ||
Spatial mode | TEM00
| |||
Beam Quality(M2) | ≤1.2 | |||
Beam Circularity | >90% | |||
Beam Full Divergence Angle | ≤2mrad | |||
Bean Diameter(1/e2) | Non-expanding:0.7±0.1mm | Non-expanding: 0.8±0.1mm | ||
Polarization Ratio | >100:1 | |||
Polarization | Horizontal | |||
Average power stability | RMS≤3%@24hours | |||
Working Temp&RH | 10-40ºC, <80% | |||
Cooling method | Water cooling | |||
Supply voltage: | AC110V/AC220V | |||
Package dimension | Machine:72*50*93cm, water chiller:68*43*57cm | |||
Gross weight | 200kgs |
>>Our machine features
1. JPT UV Laser with best laser beam quality
2 .Small size, one unit structure and user-friendly operation.
3. Imported material ZnSe F-theta lens.
4.Newest digita UV Galvo head.
5. Quality electric parts.
6. Motorized Z axis pillar, move convenience for finding focus.
7. Genuine EZCAD control program compatible with win7/win8/win10
>>Packing
1. Collect all accessories and and spare parts together one by one based on the order list ,and check all parts carefully once more to ensure all parts are included.
2. Our packaging standard:
+thick layer of plastic wrap
+ Six-sided pearl cotton
+ high-strength wooden box
+ packing belt and then fix the machine to ensure the safety of the machine during transportation.
3. Stick the shipping mark to ensure the buyer can recognize the right machine easily.
4. Stick the Safety signs can remind transporters to take good care of our equipment during shipping
Packing list
Machine | 1 set |
|
Standard Accessories |
| |
1.Focus ruler | 1pcs | |
2. English user manual | 1pcs | |
3. U-disk for software | 1pcs | |
4.software Setup CD | 1pcs | |
5.Foot switch | 1pcs | |
6.Allen wrench | 1pcs | |
7.Power cable(as per request) | 1pcs |

>>Our service
Pre-sale service
We arrange final test before shipment. We run the machine without materials for a few days, and then mark materials for test. After making sure the machine is the best performance, then ship out the machine.
After sale service
1.Details english manual book which explain the use of machines and software. Guide the customer proper use, extend product life and reduce energy consumption.
2.English documents instruction to show you how to install the machine according to each machine of order(including photos and words).
3.Online remote support appointment: after receiving your machine you can make appoint 24 hours before install the equipment. then our engineer supply online support when you are ready to start installment.
4.Our technician is available to your factory and offer training of how to use our machines. As well, you may send your technician to our company to learn how to operate machines.
About warranty
The whole machine warranty is 12 monthes, And the laser source warranty is 18 monthes.
If problems within warranty period ,we do as following:
1)Electrical components: Switching power supply, AC contactor, Switch buttons. If have quality problem in within 12 monthes,we sent to you a new one and free.
2).Motherboard and galvanometer have quality problems, We will send the new one to you , But the customer needs to return the old part to us.
3).If the laser source have quality problems,the user need send the fiber laser source back to our company and we will repair it and send back to you free.
Note :Product damage by All man-made or accident are not covered.

Optional parts




